It is a muddy ground covered by web mud , pebbles and puddles.

The SBSAR file offers the feasibility of adjusting the water level, wetness, colour of puddles.

It is a wall made of concrete plates, but it is highly eroded making a very bumpy surface.

With the sbsar file, the grout intensity and damage level can be adjusted.

It is a floor covered with irregular stones and a thin layer of sand is covering the rocks. It is a good material for both modern street view or medieval scenes.

It is a texture that is good for texturing the bumpiness of trash bags. With the sbsar, the rubbish can be push downwards. The amount of rubbish and wrinkles can also be set. Furthermore, the tension between rubbish and the trash bag can be controlled.

It is a simply rock texture, but can be applied to a large varieties of natural environment. It is simple, but useful.

It can be used to texture a single stone or as a rocky ground of cliff.

This texture is an imperfection. It is glass stain. When a glass of cold drink is put on a cloth, it will leave a water stain.

There are 6 variations which should be enough for scattering randomness.

It is a fingerprint texture which can be used to create imperfection on smooth surfaces, especially reflective materials.

It is a galvanized roll up door. The door can be rolled up into a cylinder and kept at the top of the shop.

Therefore, hinges exist between blades. Galvanized metal sheet has its particular pattern which can be found on the texture.

From the grid pattern, we know that they are waffle slabs made of reinforced concrete. They grid pattern allows concrete ribs running in 2 directions perpendicular to each other on its underside.

As it appears in public area, dust and dirt can be found on the surface. Besides, there are imperfection at junctions between slabs.

It is a concrete texture composed of Corinthian columns. Due to weathering and aging, a lot of wear and cracks appear on the surface.

Despite its name columns, this texture suits extremely well for walls and urns.

It is a concrete wall made of numerous concrete plates. Due to weathering, the concrete plates have cracks, pores and dirt.

If you are going to 3D model a concrete wall, please do not miss this texture!

It is a classical corrugated metal sheet where is commonly used to build walls of factories or construction sites.

Dirt and edge wear can be found on this texture.

It is a black floor with commonly seen white dot pattern. Dirt can easily be found on the surface, so it is a perfect texture for paving a ground of public area in your CG scene.

They are wood planks with nails. By close examination, there are rust on some nails. The edges of the planks have worn. and a lot of dirt and dust rests on the wood.

Near grouts, mosses may also be found.

This is an oxidized iron sheet on which there is numerous scratches and dents. Most of the scratches and pits corroded and are covered with rust. Besides, some of the rust is dripping down due to the rain wash.

This is mostly a muddy ground having some footsteps on the squelchy sludge. A few heavier footsteps squish the mud deeper. It creates puddles everywhere.

It is a classic red brick wall. On the top is a thin layer of plaster that has a botched workmanship. Brush strokes are prominent. Besides, the plaster only covers some parts of the wall.

It is a black cladding with a lot of dust and mud on the surface. There are also numerous worn and cracks on each cladding plate. Besides, pebbles scatter all over the ground.

These are classic old tiles with star-shaped patterns printed. The tiles become yellowish due to aging. The edges of tiles are worn to reveal its history.

Dirt and dust can also be found on the floor. Dents occasionally appear on some tiles.

They are old chewing gums spitted on the floor. Some streets are full of black patches of chewed gums spilled around.

They are dark in colors as people stepped on them. This also left loads of shoe marks and dust on these gooey gums.