It is a fan-shape pavement covered by greyish cobblestones which are masked by a thin layer of brownish sand. Edge wear can also be found on these little rocks.

The SBSAR grants users the flexibility to change the numbers of cobblestones and rings, edge wear level, sand level etc. Users can also add puddles to the material though the default texture does not have any sign of puddles.

They are stylized wood planks with exaggerated worn effect and cut.

The SBSAR file allows designers to change the number of planks and nails, gap width, nail size, level of wear, grain size, dirt level etc.

They are old wood planks which have a lot of wear, cracks and scratches. Wood grains can also be seen.

The plank amount, grout width, wood color etc. can be changed by the SBSAR file.

It is a muddy ground covered by web mud , pebbles and puddles.

The SBSAR file offers the feasibility of adjusting the water level, wetness, colour of puddles.

It is a floor covered with irregular stones and a thin layer of sand is covering the rocks. It is a good material for both modern street view or medieval scenes.

It is a rocky and sandy ground where a lot of fossils were found. Among the fossils, some are popping up after the mud has been cleaned. They are waiting to be removed. Whereas the removed fossils left fossil holes on the muddy ground.

They are wood planks with nails on both ends. Rust can be found on the nails. The wood planks has a lot of worn areas due to weathering. Knots also appear on the planks.

They are wood planks painted in red, but some paint is peeling off due to weathering. Besides, there are wear and broken parts.

It is a fabulous material for creating old doors, fences and even houses.

It is a black floor with commonly seen white dot pattern. Dirt can easily be found on the surface, so it is a perfect texture for paving a ground of public area in your CG scene.

They are wood planks with nails. By close examination, there are rust on some nails. The edges of the planks have worn. and a lot of dirt and dust rests on the wood.

Near grouts, mosses may also be found.

This is mostly a muddy ground having some footsteps on the squelchy sludge. A few heavier footsteps squish the mud deeper. It creates puddles everywhere.

This is a texture made of lots of gravel. It can be used as pavement for roads or to cover mud in backyard.

With your imagination, it could also be a wall texture.

This is a very raw wood plank. Due to aging, most of the planks are worn. It is made of rough type of wood that gives it a very bumpy texture.

This is a muddy swamp and fallen leaves are everywhere. There are a lot of tiny pebbles in the mud. Puddles also appear on this wet and sticky earth.

This is a mixture of straw grass and other dried grass. In more general term, it is hay.

If you are going to model a farm, you should not miss this hay texture.

This is lava texture. It is the residues of volcano eruption. Before lava is cooled down, it is flowing down the mountain as it is a melted substance. The movement gives lava the highly folded appearance.

Red and hot flame is glowing everywhere. Some parts have a higher temperature than others.

That is a sandy ground such as beach. It has wavy patterns due to wind. Tiny pebbles can occasionally be found.

Simply put on this texture on a flat surface, you will have a beautiful beach!

This is a rubber mulch mat that can easily be found is many playground for safety. It is a material having a lot of pores, but it can absorb vibration that makes it a good substance for protecting children in playing field.

If you want to texture a playground, please don't miss this PBR texture.

It is a black cladding with a lot of dust and mud on the surface. There are also numerous worn and cracks on each cladding plate. Besides, pebbles scatter all over the ground.

This is a mossy ground that is full of green and yellowish moss covering the whole rock and ground.