This metallic wall is made of numerous rusty and oxidized rectangular and square metal plates. Each plate is riveted by metal pins.

Scratches and dirt can also be found on the surface.

It is a corrugated iron plate with rivet type of nails. The metal is casted into a wavy pattern.

The colours of the plate and rivets, visibility of nails, parameters of scratches etc. can all be managed through the Substance SBSAR file.

They are stylized wood planks with exaggerated worn effect and cut.

The SBSAR file allows designers to change the number of planks and nails, gap width, nail size, level of wear, grain size, dirt level etc.

They are wood planks with nails on both ends. Rust can be found on the nails. The wood planks has a lot of worn areas due to weathering. Knots also appear on the planks.

It is a typical nailed leather material for sofas. All nails are highly oxidized and the red texture is worn. It has a lot of cracks and scratches on its surface.

The peeled off area exposes the underneath leather color which is grey.

It is a tremendously rusted metal plate. Thick layers of rust cover the whole iron surface, but the rust is thinner around round cap nails.

The rust has different colors including light brown, dark brown, orange and black.

Scratches can also be found on the rusty superficial.

This highly oxidized metal plate is full of round cap nails, but well aligned. It is usually used as covers for containers.

Dirt has accumulated around round caps as those are good places to hide debris.

Oxidation has different degrees too. It can be proved by different reflectivity.

Of course, scratches cannot be omitted for oxidized iron metals.

They are very rough wood planks having remarkable wooden barks on the surface. Each corner of a plank is fixed by an iron nails.

It is extremely decent for flooring.