It is a white painted metal plate bent into a corrugated shape. Each sheet is fixed by bolt nuts. Dirt can be found around the nuts and on the surface.

The colour of the paint, nuts and gap, length and width of scratches etc. can be controlled by the Substance 3D SBSAR file.

It is chipped paint of a machine. There are both paint peeling and scratches.

The paint colour, rust colour, rusty range, peeling effect, dirt level etc. can be manipulated by the Substance SBSAR file.

It is an old and worn concrete wall having loads of chipped paint.

The paint color, concrete color, damage level, amount of scratches, amount of dents, peeling effect intensity etc. can all be controlled through the SBSAR file.

It is the chipped paint of a machine. The exposed metal is highly rusted and the rust is dripping down the surface.

The paint color, intensity of blisters, rust color, rust amount, range of dripping rust, amount of cracks etc. can be defined by the SBSAR file.

It is a machinery case having a yellow coating, but there is a lot of chipped paint.

The colors of paint and rust, amount of rust, cracks, dents and dirt can be adjusted with the Substance SBSAR file.

It is a painted metal sheet, but there is some peeling paint. The chipped area exposed the metal that becomes very rusty.

The color of the paint, color of the rust, amount of paint blisters, amount of rust, length of dripping rust, amount of scratches etc. can be controlled by the Substance Designer SBSAR file.

It is a dirty plaster wall with dirt and moss on the surface.

The SBSAR file let users adjust the amount and intensity of dirt and moss. The damage level can also be changed.

They are hand painted tiles, so brush strokes and defects can easily be spotted. The teal color makes these tiles evergreen for kitchens and bathrooms. Instead of paving traditional porcelain tiles, this handmade tiles grant the house interior a contemporary appearance.

The SBSAR file let users to change the tile amount, tile ratio, grout width, grout color, edge wear level, paint wear level etc.

The surface of this paint is blistering and bubbling due to ageing and bad maintenance.

The SBSAR allows users to adjust the paint color, number, size and intensity of bubbles and dents etc.

It is a cooking pan with black and white spots on the coating.

The SBSAR gives users the flexibility to change the amount, size and density of dots.

It is an old worn concrete wall which has a lot of large holes exposing inner reinforcement bars (rebars). The outer paint is also peeling off. Numerous cracks also appear on the concrete.

Using the SBSAR file, the wall colour, number of concrete plates and rebars, depth of holes etc. can be set.

It is a a plaster wall painted in white, but leaving prominent paint marks due to poor workmanship.

Pores can also be found on this concrete plaster texture.

Its normal map can be used as an imperfection or decal for walls.

It is a classic red brick wall. On the top is a thin layer of plaster that has a botched workmanship. Brush strokes are prominent. Besides, the plaster only covers some parts of the wall.

It is a concrete wall painted in green, but it has a lot of cracks and most of the paint is peeling off.

The peeled off area shows the light brown concrete wall which is rather bumpy and has a lot of pores.

Scratches can also be found on both the paint and the concrete wall.

It is a raw wood texture painted in white. Due to weathering, the paint coating layer is peeling off.

It is a rather rough and raw wood having very bumpy tree barks and textures. The wood plank is broken showing a few long vertical cracks.

Mud and dirt covers the painted wood.

It is a metal plate painted in blue, but there are tons of scratches on the paint coating revealing the shiny iron metal underneath the pigment.

There are big and small scratches. Some of the paint is peeled off.