It is a worn and brown leather material. This leather has a very typical pattern which has scratches and dents on the surface.

Its base colors have some variations. Besides, aging, worn parts and dirt could be found on this texture.

It is a typical nailed leather material for sofas. All nails are highly oxidized and the red texture is worn. It has a lot of cracks and scratches on its surface.

The peeled off area exposes the underneath leather color which is grey.

It is a concrete wall painted in green, but it has a lot of cracks and most of the paint is peeling off.

The peeled off area shows the light brown concrete wall which is rather bumpy and has a lot of pores.

Scratches can also be found on both the paint and the concrete wall.

It is a raw wood texture painted in white. Due to weathering, the paint coating layer is peeling off.

It is a rather rough and raw wood having very bumpy tree barks and textures. The wood plank is broken showing a few long vertical cracks.

Mud and dirt covers the painted wood.

It is a red tufted leather which is ultimately for sofas and chairs. The red buttons make depressions at intervals by pushing the leather in. This creates the characteristic of tufted sofas.

Since it is a leather, scratches is almost unavoidable. Besides, dirt and pits appear on the material surface too.

It is a metal plate painted in blue, but there are tons of scratches on the paint coating revealing the shiny iron metal underneath the pigment.

There are big and small scratches. Some of the paint is peeled off.

It is a tremendously rusted metal plate. Thick layers of rust cover the whole iron surface, but the rust is thinner around round cap nails.

The rust has different colors including light brown, dark brown, orange and black.

Scratches can also be found on the rusty superficial.

It is a galvanized metal sheet with different sizes of scratches and pitting.

The crystallized pattern defines the signature of galvanized iron.

Galvanized metal is commonly used for covering wooden structure. Usually, construction workers simply nail them on wooden parts.

It is also used to make water tanks.

The paper has been symmetrically folded and unfold leaving a prominent crease mark at the center.

Wrinkles, dirts and scratches are on the paper too.

It is a rough paper.

This texture composes of multiple corrugated sheets of metal stacking on each other. The wavy shape of corrugated metals makes it stands out among other metals.

If you look at it carefully, you will find there are rusty cuts and scratches.

This scratched wood is covered with countless mosses and mold/mould.

There are different colors of mosses. It implies it is a habitat of many species of mosses.

It is the optimal texture for antique furniture which is usually full of mold.

It is a light brown wood with a lot of scratches. The wood pattern is pretty distinguishable.

This material is right for desks, school chairs and cupboards.

The brown tiles are arranged in a classical pattern. Scratches and spots are all over the surface.

It is a fine material for texturing old floors.

It is a plain iron metal. The surface tells it is highly oxidized leaving only a few shiny areas.

Besides, the surface is covered with rust and dirt.