It is exposed concrete aggregate pavement. Exposed concrete aggregate is commonly used as decorative concrete. The top layer of cement paste is removed and the underlying aggregate is exposed.

This kind of concrete is very durable and skid-resistant, so it is a great material for texturing sidewalks, driveways, pool decks etc.

It is also a good substance for rough walls.

It is a chain-link fencing made of iron or steel. It is galvanized to reduce corrosion, so it can keep its shiny silver color.

Chain-link Iron Wire Fence Texture Woven in Diamond Shape
(Metal 0017) is similar to this material except Metal 0017 is highly oxidized and has a lot of rust.

It is a stone wall cladding. The stones are of irregular shapes. Some are round; Some are more rectangular and pentagonal.

Each stone has different degrees of damages. Dirt and edge wear can be found on each stone.

It is a chain-link fence made of iron or steel. Frequently, it is woven in diamond shapes which form the characteristic of this type of fences.

Due to weathering, this fence has some degrees of deformation. Rust, oxidation and dirt can be everywhere. There are some worn on wires too.

They are very typical red construction bricks. Though they are called as red bricks, their colors tend to be orange.

Their surface is very rough and full of pits or tiny holes. Edges are also ragged. There are also some damages on the exterior.

The brick layout of these bricks are quite different from classical one. They are arranged in a pattern called basket weave.

It is a perfect black asphalt with no cracks and damaged areas.

Rolled asphalt is commonly used to surface roads. This composite material is also used for paving parking lots.

This paving tiles are usually used with its companion tiles Tiles 0009.

These tiles have a pattern of 3 bands while its complementary tiles Tiles 0009 have a pattern of dots.

They are made of PVC / plastic.

Dirt can be found on the top and around the pop up stripes.

This concrete texture has cracks, pitting, flakes and scratches on the surface.

This texture is suitable for walls and pavements.

Those gray bricks have a lot of mosses on the surface. If they are enlarged, lichens can also be found.

This texture is rather bumpy and coarse.

It can act as both a wall material and a floor material.

They are typical tactile pavement tiles which you can find on almost every street in modern cities. Each tactile tile has bumped up flat dots. Each dot or circle has tiny crosses on the top to increase the fiction of the ground.

This paving tiles are usually used with its companion tiles Tiles 0011.

These tiles have a pattern of dots while its complementary tiles Tiles 0011 have a pattern of 3 bands.

This is an old-fashioned square tiles. The tiles are severely damaged, so it exposes the white and brown base material.

It is extremely bumpy and with many missing pieces.

Undoubtedly, this is a dry out land leaving numberless cracks on the surface.

It also looks like a soil texture.

Walls of some ancient houses were made of mud. After being dry, the texture of those walls look similar to this texture too.

It is an asphalt texture with cracks all over the surface. Definitely, it is a marvelous material for ground or flooring. It is also great for texturing a wall.

It is a flooded and muddy texture. It looks like surfaces of marshes.

Undoubtedly, it is an excellent texture for swampland, marshland and bogs.

Comparing to Ground 0001, it is more moisture-laden and its surface is smoother.

This lumpy texture has an irregular surface which has numerous pebbles.

The damp and marshy texture grants it the appearance of a swampy ground.

It is a very rough concrete with a lot of tiny pits or pores.

White spots can be found on the surface.

Besides, big cracks are everywhere.

After applying this texture to a wall, it looks like a thick plaster wall. The grey color gives it a raw appearance.

It is a worn out material with some cracks running across the whole texture. There are a lot of trowel marks leaving on the texture.

This concrete has a bit shiny texture. A few big cracks are running on the concrete. Greenish mold also grows on the surface.

It looks natural when being used as concrete wall or floor texture of damaged buildings and roads.

It is a very common grey asphalt.

This texture fits for highways, car roads, pedestrian roads, pavements etc.

It also right for concrete walls and pillars.

They are classic tiled grey bricks which can be found in many streets and parks.

Bricks can be arranged in a lot of patterns. Herringbone pattern is one of the most common patterns, which can be found on many pavements.

This texture is quite similar to Bricks 0003, except it is grey and its edges are worn out.

It is suitable for pavements and sidewalk, especially outdoor ones.