They are chinaware tiles with Chinese patterns on the top. The porcelain tiles are highly worn and have a few big cracks.

The China tiles are mainly green and yellow with a traditional Chinese symbol.

Of course, a lot of dirt is found on the surface.

This material is suitable for china artworks such as vases. It is also a good texture for walls.

It is a highly reflective black and white marble plate.

The white cracks have different width and the black cloudy background creates an illusion of depth.

It is a perfect material for texturing walls and floors in 3D architectural visualization (archviz).

The layered patterns defines the signature of travertine stones. The color of this travertine marble is mainly yellow with a bit white and brown layers in between.

The surface of this texture is a little bump, but overall it is still smooth.

It is a granite type of marble which is composed of grey, pink, black and white flake-like patterns.

Grey is the major color, but pink also play an important role in defining the granite colors.

They are Tadao Ando type of concrete plate. Concrete 0008 is horizontally arranged while this texture is vertically organized.

Besides, these concrete plates has 8 holes while Concrete 0008 has only 4 holes.

Dirt can easily be seen on the surface.

They are Tadao Ando type of concrete plates. The four bolt holes are the signatures of this kind of concrete materials.

The surface is rather rough and dirt can be found on the superficial.

They are not real bricks, but decorative bricks for walls. They have extraordinary bumpy surface.

Dirt can be found on the surface.

They are used for wall decoration in bedrooms and kitchens.

They are very shiny red bricks which are mainly used for decorating walls of kitchen, bathroom or washroom.

Due to the highly reflective surface, numerous finger prints are left on the tiles.

Dirt also accumulates around grouts.

It is a common and classical yellowish marble texture. This kind of texture can be found on walls and floors of many old hotels and buildings.

It is a perfect architectural material for traditional interior design.

It is a large piece of white marble which has a lot of black and grey cracks building the "network" of the marble.

There are thick and thin cracks and the background has different grey scales.

These bricks are organized in an very irregular pattern. Though it looks chaotic, they are roughly arranged row after row.

The weary bricks have different colors such as pink, yellow, orange, grey and brown.

Some are rectangular while some are square. Some are large and some are small.

This material is very suitable for walls.

These red bricks are arranged in running bond layout and they are partially covered by excessive cement came from grouts.

They have various red and orange colors. Some of them are white and have the colors of concrete.

The edges are worn and there are also pitting on bricks and grouts(gaps).

They are very typical red construction bricks. Though they are called as red bricks, their colors tend to be orange.

Their surface is very rough and full of pits or tiny holes. Edges are also ragged. There are also some damages on the exterior.

The brick layout of these bricks are quite different from classical one. They are arranged in a pattern called basket weave.

It is a disastrously damaged concrete wall exposing thoroughly rusted reinforcing steels.

Areas around rusty concrete steels are also contaminated by rust.

The concrete surface is very bumpy and full of pits.

Comparing to normal red bricks, these grey bricks are much longer. Unexceptionally, the bricks are arranged in running bone layout pattern.

Edge wear, edge dirt, trowel marks and lump areas are on the surface too!

They are classical red bricks widely used in many European countries including United Kingdom, Netherlands etc.

If you inspect the bricks carefully, you will find trowel marks on it. Of course, pits, scratches, worn and damaged areas also exist.

It is terrazzo. Some people group it as marble.

The pattern of terrazzo is the most popular and typical one. It has a variety of colors including orange, red, brown and grey.

The flakes are of different sizes too.

Surely, the tiles are blue and white porcelain having a diamond and a circle as the pattern.

The colors of the tiles are alternating creating the checker pattern.

The diamond and circle on each tile are not flat. They have depth and thickness.

This is the most typical marble pattern which is orange and has white stripes.

There is dirt on these square tiles. The dirt can barely been seen, but it affects the glossiness.

This marble pattern is usually found in lobbies of old hotels.

This concrete texture has cracks, pitting, flakes and scratches on the surface.

This texture is suitable for walls and pavements.